My Cisco World
Saturday, November 24, 2007
EIGRP Summarization
›
EIGRP support two types of summarization: auto-sum & manually sum on interface-mode. - By default, auto summarization is enabled on inte...
Wednesday, November 07, 2007
MPLS Label Stack in MPLS VPN, MPLS TE & AToM
›
+ In MPLS Layer 3 VPN, the top label in the label stack represents the IGP path to the next-hop Border Gateway Protocol (BGP) router, which ...
Tuesday, October 30, 2007
Restrictions for the EtherSwitch Network Module
›
The following functions are not supported by the EtherSwitch network module: • CGMP client, CGMP fast-leave • Dynamic ports • Dynami...
2 comments:
Wednesday, October 24, 2007
Vlan & Trunking
›
Tip about creating VLAN: Tip about VTP: Cisco switches default to use VTP server mode, but they do not start sending VTP updates until the s...
Duplex Mode
›
Default duplex mode is - For 10Mbps & 100Mbps port: half-duplex - For 1Gbps port: Full-duplex On a 100Mbps ports, if we configure full...
What is the difference between VLSM & CIDR?
›
VLSM : is kind of dividing a major network into multiple subnets with different subnet masks. For example, major network 172.16.1.0 can be d...
1 comment:
Friday, October 19, 2007
MPLS notes
›
Here is some MPLS notes - In frame mode, MPLS uses a 32-bit label that is inserted between the Layer 2 and Layer 3 headers - PHP (Penultima...
Monday, October 15, 2007
Dynamips - Current HW supported
›
A great post that guide how to connect card/module on Dynamips Router (http://7200emu.hacki.at/viewtopic.php?t=1831&highlight=current++...
Tuesday, October 09, 2007
BGP-FAQs
›
This document contains frequently asked questions (FAQs) about Border Gateway Protocol (BGP) from Cisco website (http://www.cisco.co...
1 comment:
Access-List vs Prefix-List
›
What is the difference between an access-list & a prefix-list ? The ip prefix-list command is used to configure IP prefix filtering. P...
24 comments:
›
Home
View web version